I am only looking for comments/responses from people that successfully re-calibrated the suspension on a Cherokee using a scan tool. I have properly filled the nitrogen tank to 175 psi behind the driver's side back seat, and attempted the fill procedure using the Xtool D7 scan tool. This scan tool only gives me 1 actuation command, which lifted the back. I re-pressurized the nitrogen tank to 175psi and ran the fill procedure again, and it lifted the front partially before giving an error. I never got to the measurement part of the procedure, and again, I only have 1 available operation on the scan tool. It's like a guided walkthrough with prompts.