2013 camry i4 191000 miles. burning oil, cahnge every 5k miles after change oil put a bottle at205
, the car start acting at after 150 miles choking when idle intermetting .oil light came in 1 second turn off intermitting. engine light came on off p0015 intermitting b camshaft postion timing over retarted bank 1 i still driving 30 miles. den home. do i need to change oil again? to take out at205 is it at205 cause the issue or coincidence other ppl put at205 no problem.
after change oil put a bottle at205
Why? Do you have an engine seal leaking?
engine light came on off p0015
See troubleshooting information for that code below:
https://www.carparts.com/blog/p0015-code-exhaust-b-camshaft-position-timing-over-retarded-bank-1/
https://www.obd-codes.com/p0015
do i need to change oil again? to take out at205
Why?
is it at205 cause the issue
Of course not.
@chucktobias 1000 miles burn or leak 1000 ml oil i change every 5000 miles mayb costco oil? cheap oil? 19$ per 1.25 gallon
@chucktobias You can check for leaks with UV dye. If it's not leaking it's burning and AT205 of course won't do anything for that. (It may not do anything for leaks either depending on the source.) There's nothing wrong with Costco or WalMart brand oil.
@chucktobias i change oil , it didnt happen again. po0015
@chucktobias happen again after 1000 miles
Have you done the troubleshooting steps outlined in the links provided?
whats s the problem? the camshaft oil control valve?
Have you researched to possible causes for that code and the troubleshooting steps required to determine that actual cause?
https://www.carparts.com/blog/p0012-code-intake-a-camshaft-position-timing-over-retarded-bank-1/
https://www.obd-codes.com/p0012
This is really the same kind of problem as P0015 which you have already asked about, so this will be merged with your previous topic. Please note that the forum rules prohibit posting multiple topics about the same problem.
2013 camry 192000 i4 code came back after 1000 oil change p0012 whats s the problem? the camshaft oil control valve? bad