Notifications
Clear all
0
29/12/2020 11:31 am
Topic starter
I have a 08 scion xb my dad and i were doing a brake job and the back 14mm bolt that attach the caliber are stuck. How do i bolt out?
3 Answers
0
29/12/2020 5:32 pm
use a nice long breaker bar
0
29/12/2020 12:05 pm
Put a propane torch to it for a short amount of time. This MAY break it loose if you're lucky.
0
29/12/2020 12:14 pm
I'm assuming the slide pins? First, make sure you're unscrewing it the right way...it's sort of in a weird orientation because you're unscrewing from the back side. When it's fully unscrewed, it may get stuck from the slide grease, so get a flathead screw driver and push it out from the threads when the caliper is loose. When reinstalling, use Sil-Glyde brake lubricant on the slide pins after properly cleaning off the old grease with brake cleaner.
