2002 Lexus is300 2JZ non turbo
I was changing the Valve cover gaskets and my 10mm coil screw fell on the intake side below the fire wall and i believe the holes are called the oil drain ports it fell now what should I do, I put a magnet inside and it didn’t catch anything, is it in the oil pan? Is it stuck in the motor I made sure it went down completely by pushing a a piece of wire down forcing it in the bottom of the car, please help
drain the oil and see if it comes out
Well, without knowing how your oil passages are configured it would be hard to predict, bu, it may be in the oil pan. You might as well take the oil pan off and see it it is in there. If not, you could try using an air compressor to blow the screw out.
My car is 2002 Lexus is300 2JZ non turbo
This is the stuff nightmares are made of.
One thing that I just thought of - you might want to get one of these from Amazon -
Wireless Endoscope Camera, NIDAGE WiFi 5.5mm 1080P HD Borescope Inspection Camera for iPhone Android, 2MP Semi-Rigid Snake Camera for Inspecting Motor Engine Sewer Pipe Vehicle (33FT