I have suzuki alto 660cc japanese AGS 2015 MODEL used liqui moli throttle body cleaner according to your recommendation wait for 1 hour to dry then start the engine.....black smoke appears for 2 to 3 minutes only and then black smoke disappear the car idle at 1200 to 1300 rpm then drop down to 800 rpm after 5 ....use obd 2 device it give 2 fault codes p0117 and p2000....radiator fan is running fine temperature light blue is off no signal appears on dashboard yet what would I do now....???
Thanks for the tip...Starting is okay and Idling is smooth I would try disconnecting the terminal and let you know......please tell me is it worrying or not what other things can I do know???
Well I never used liquid Molly throttle cleaner so I have no idea what's in that product. If it does actually have molybdenum in it that could cause a problem in a throttle. But you might try resetting the car by disconnecting the battery cables for 10 minutes and then restarting a car and see if it relearns idle
I disconnected battery terminals and then restart engine Idling is smooth at 800 to 820 rpm ....I drive the car for 30 min at 80 to 100 km/h no signal at dashboard it give me 21km/l average but obd 2 device still gives 2 fault codes p0117 and p2000 what would I do know scotty???
Thanks for the tip...Starting is okay and Idling is smooth I would try disconnecting the terminal and let you know......please tell me is it worrying or not what other things can I do know???