I have a 2000 Chevrolet S10 pickup truck with a 2.2l gas non flex type engine no PVC valve. I just got my new injectors instead of having six holes like I had hoped they have three on the output. How much of a difference in fuel efficiency am I going to lose to this change and can I correct the problem by making a minor adjustment in the bend of the intake? Is it even worth concern? Can my PCM compensate to avoid running too rich?
as I recall not new
brand new
So if you get that plus the 3 from carid you'll have 4
failing that, get the ACDelco Gold, part# 19304535
I am afraid is that those are discontinued
looks like they are. it's a 24yo vehicle. but if you take care of them, these should last you lifetime of the vehicle.
mostly have the aftermarket
better than nothing at all
These injectors at this link are the correct ones for your vehicle. If that's what you have then just install and go.
https://www.rockauto.com/en/moreinfo.php?pk=344115&cc=1361483&pt=6224&jsn=486
The problem is that type of injector is not available in a full quantity a four that I need. Rock Auto only has 1 in stock and as I recall not new. Neither Amazon nor CarID have more than three. If it's just a temporary shortage I guess I can buy from the three. However what I am afraid is that those are discontinued altogether and the quantity will not be replenished. Every place I look at including Rock Auto mostly have the aftermarket with large holes like in the NAPA part in this link
https://www.napaonline.com/en/p/CRB218383
I thought I was buying what mountain man Joe showed me but instead Amazon sent me the one in the link I am posting here