96 Tacoma 2.4 manual 5 speed. 376.000 miles. Ran good until I actually let the clutch out while stopped and running. Now it turns over but no start. Has compression and spark. No fuel coming from fuel line. Do you think it’s the fuel pump or electrical. Codes are p0100 mass or volume air flow circuit,p0120 throttle peddle position switch A circuit,p0141 oxygen sensor heater circuit bank 1, p0401 exhaust gas, recirculation flow, insignificant, detected, p0402 exhaust gas, recirculation flow excessive detected, p1300 igniter, circuit number one. Any suggestions appreciated.
No fuel coming from fuel line. Do you think it’s the fuel pump or electrical.
I would start by making sure that the fuel pump relay is engaging. Have a guy in the car turn the key to the run position, see if you hear a click coming from the fuse box. If you hear a click that means your fuel pump relay is getting power and you have a bad fuel pump. You can also try hooking up a multimeter and testing for voltage at the fuel pump relay (location will be specified in your owners manual)
Codes are p0100 mass or volume air flow circuit,p0120 throttle peddle position switch A circuit,p0141 oxygen sensor heater circuit bank 1, p0401 exhaust gas, recirculation flow, insignificant, detected, p0402 exhaust gas, recirculation flow excessive detected, p1300 igniter, circuit number one.
well that's a lot of codes, some of which are not related to each other. I would start by double checking to ensure good connections (clean and free from rust/corrosion), and also load test your battery. Sometimes weak batteries will trip all sorts of wacky codes.
