2000 vw jetta 2.0 i crank the car up and stalls on me i crank it up again and give it some gas it stays idling i got these specific codes.. I cleaned the throttle body i took it off sprayed it with cleaner. cleaned the maf sensor with maf cleaner only and still wanting to stall its a 5 speed by the way thanks
P1582 idle speed control
P0134 02 sensor circ B1 S1 no activity detected
P0103 mass or volume air flow circ high output
P1128 Bank 1 adaptation (multi) system to lean
P1582 is actually this
https://www.vwpartsvortex.com/blog/dtc-decoded-p1582
I would start by inspecting/cleaning the idle air control
I did that it's still stalling on me sometimes you think that computer thing on the back could be throwing it off??
yes electrical faults could certainly contribute to the problem
Ok mountain man Joe thanks alot man ima order another throttle body tomorrow and hopefully that fixes my stalling problem. 🔧
Why? You haven't proven the throttle body is the problem, so you could be wasting your money. It won't help if it's the wiring harness that's damaged.
Somebody needs to do a proper diagnosis on your vehicle and it's kind of hard from where I'm sitting. You might be better off taking it to a mechanic.
Im a diy i like to save money mountain man Joe i got a test light and a dmm to see if the throttle body harness getting v power and ground ill check that first but if i get power and ground from the connection it got to be the throttle body