Heating problems ? new radiator, new cap, new water pump, new thromastat, new Daul fans, No water in oil, dip stick or cap , tried jacking up car, tried vacum pump out air, tried pulling thromastat out flushing water thru hose gos in and out good, over heats with or with out thermosat install, top hose gets hot, bottom hose stays cold ? i'm at a lost , no codes automatic 200 k mles. Help thanks mike
It could be a sensor not turning the fans on. Have you checked to make sure one or both are in fact kicking on?
There could be a blockage, what looks fine might be a trickle in comparison to how it should be flowing.
Also, try making your post more clear. It's a bit of a chore making sense of all that.
Get a burp funnel and properly get the air out of the system. Attach the funnel, fill it 1/4 with coolant, start the car, set the heater on high and let it run until the thermostat opens and air bubbles stop coming up in the funnel, about 10-15 minutes. Then fill the reservoir to the "max" line with coolant.
