Have a ford b max 2012 ecoboost 1.0 2014 the drivers seat belt keeps sticking any suggestions how to fix or is it a job I have to take the car to garage
Regards
Steven
Does it stick meaning it doesn't unroll or is it sticky coming through the guide? If it's through the guide, it's because crud builds up on the belt itself. Get some detergent and water and clean off the belt. If it's doesn't unroll, you'll have to take apart the roll up mechanism and fix the stuck motion sensor lock (also full of crud) that is supposed to stop you before you hit the windshield.
Sorry I didn't mean sticky I mean when you pull it out it it jams all the time then I sprayed wd40 in it comes out but it still jams in makes a noise hope this makes sence to you
If you mean the latch won't release when you hit the release button the latch assembly might be worn and need replacement. Or, it might just be gunked up - I'd try spraying in a good lubricant like Tri-Flow and work the mechanism a few times to see if that frees it up.
What dose these mean axle swivel pins and bushes swivel pins worn
It means that the roll up mechanism is worn out and needs replacement. I've never seen repair parts available..