Notifications
Clear all
0
23/11/2024 4:30 pm
Topic starter
I'm replacing lifters on a 2007 Chevy 1500 Silverado with a 5.3l
When torquing down heads how far off or how important is it to the get the angle of degrees within spec? Please this will help me a ton I get 45 is eigth turn and 90 is qaurter turn and 180 is a half turn how close to i have to be to 35degree turn and 70degree turn should i buy a torque wrench with angling on it? Do I have to be exact thanxx!!!
1 Answer
1
23/11/2024 4:41 pm
Another possibility is you can get an inexpensive angle gaurge to make sure you're in spec. Works great as long as there's room to use it.
https://www.amazon.com/Supercrazy-Torque-Wrench-Angle-SF0136/dp/B00L6I1874
