I bought a used F250 4x4 King Ranch. I think it is lifted. How hard is it to take out the lift?
Clarification: Which model year and what all was done by the previous owner to lift it?
2017 but I'm not sure what was done as I've never had lifted truck before. I just know it's higher than specs say it should be.
It depends. Some pictures would help.
Check to see if there and blocks between the rear leaf springs and the axle. If they are there, you have a lift kit. Normally, the blocks can just be removed from the rear and the axle and spring bolted back together. Most lift kits for trucks with front leaf springs use new arched springs that would have to be replaced with the stock ones. You may also have to reinstall the stock steering arm if that was replaced with and offset one.
If it is a liitle lift like 1inch I would leave it the way it is. Its not hard to do it but quite a lot of work. Search on google LIFT KIT for F250 and you would see how many components you need to change.
It's about 3 inches over factory specs.