Dear Scotty
i watch your video about reprogramming the car in my case an Audi 2002 A4 V6 but I was not able to find the 10 Ohm resistor but 6 Ohm
Can I connect 2 6 ohm and do what you show in video?
It's a 10 watt, 1 ohm resistor that Scotty used here and they're available on Amazon. You can accomplish the same thing by disconnecting the battery and then turning your lights on.
Oreilly's, Autozone, Advaned Auto, etc. They'll typically scan & clear codes for free.
Thank you for your answer.
This car windows don’t go down, the turn signals don’t work only the emergency flashers and brakes lights.
The AC don’t work either but we check the gas and some mecanic said I don’t need a compresor because the electricity don’t go there.
The car start and run perfectly I put a new battery and a new break booster and vacum pump but we cannot make the windows go down . They put a very expensive computer in and no fuse code come up but Modem one
They told me that they cannot clean the codes but the Audi dealer.
The computer said after they clean the codes: Steering column electric control module-No communication
Comfort system central module -please read DTC
Databus drivetrain missing message from steering column Electronic implausible signal.
They told me to take it to reprograms at dealer
Please help
Thank you very much
Why the downvote? Are you trying to get the power windows to work, is this right?
I apologize
I am new here didn’t mean to do down vote
You're fine, just trying to help you. Down vote means "not helpful" which I didn't understand.
This car windows don’t go down, the turn signals don’t work
The AC don’t work either because the electricity don’t go there.
They put a very expensive computer in and no fuse code come up but Modem one
They told me that they cannot clean the codes but the Audi dealer.
The computer said after they clean the codes: Steering column electric control module-No communication
Comfort system central module -please read DTC
Databus drivetrain missing message from steering column Electronic implausible signal.
They told me to take it to reprograms at dealer
A good high level scan tool can still read and erase the codes. Plz post any codes you've found. Steering column, comfort system module, databus drivetrain DTCs could all be related to a single issue.
What does 'very expensive computer' mean, was the ECU replaced and needs to be reprogrammed?
Please use the search box in the top right corner.
https://carkiller.com/scottykilmer/qa/1-ohm-10-watt-resistor/
