Having a problem with no codes. Recently replaced the valve gasket, coils, plugs. Ran great for a week and then started getting some jerking. Eventually went to start and jerked heavily and would stall. Motor shook like starving for fuel/pressure issue. Replaced the fuel pump, no more shaking just crank no start with no codes coming back. Cam sensor or crank sensor? Tried some starter fluid and it wanted to start but didn’t fully start. Thanks in advance, you’ve helped me a lot over the years.
Did you check the fuel filter when you changed the pump? It could be clogged.
@mod_man
There is no filter on the fuel rail, only in the pump, which I just replaced. My Haynes manual shows nothing about it and cargurus said similar
Check whether you injectors are getting current. You say that the car seems to shake like it is starving for fuel, so I would start from there. Scotty also has a video on YouTube regarding cars stopped running for no reason and with no codes.
https://www.youtube.com/watch?v=hzYONeD9xUU
@weallbroke thank you for the link, I will watch here in a minute, that is how the engine was when vehicle first stopped. After replacing the fuel filter it’s no longer shaking, crank no start now and with starting fluid it it wanted to start but didn’t get all the way there. I wanted to post a video of it, but can’t do that here.
Make sure you didn;t pinch a harness for the injectors when you changes the cover gaskets. Sounds to me like something "electrical" got disturbed.
@porkchophill thanks I will check that and fuel pressure when I get home. Hoping for enough life. After I changed the gasket cover it ran great for a week