Car Questions

How do I fix Cobalt...
 
Notifications
Clear all

How do I fix Cobalt blowby

  

0
Topic starter

I have a Chevy cobalt with a 2.2 l engine and 92000 miles. The car drives fine and shifts fine it idles a little funny though when I first start it up as in it idles high for about 30 seconds. After driving a while it’s like a new vehicle. I do notice a little blowby and a little bit of oil on the spark plug closest to the passenger side. It is full on oil and isn’t burning or leaking oil. Could I get some oil flush I heard it can sometimes fix blowby. If not what should I do? 


3 Answers
0

Those are probably made vehicles and yours is just flat wearing out you could try something like Lucas heavy oil treatment it might slow it down a little but if it's only doing it one cylinder those Pistons are wearing out


0

Check to make sure your pcv valve is clean and working.


0

As Scotty said, it is likely just wear and tear. Those cars were built as throwaways so if you get 100k out of it you've done well.


Share: