Hello Scotty, ABS engages when stopping very slow and turning the wheel to the right after doing the following. Initially it would do it at all slow stops this is what I did. Scan tool no codes, but when road tested right front wheel would show a drop off when slow braking. Took sensor out and saw rust jacking so cleaned sensor and rust off knuckle and put a shim on the bolt side of the sensor to flatten out the sensor. Solved 97% of problem only engages when very slow stopping and turning the wheel to the right. Not sure if it could be the knuckle what do you think replacing the knuckle would be above my pay grade what would be a reasonable price at the Toyota dealer for the job don't have good mechanics around AC NJ. Thanks Scotty love your videos
But that's a weird one you said something when you turn hard I would assume there's a problem in the wiring harness and somehow it's weak and when you turn it it kind of breaks down because the wiring is going bad
Hello Scotty I know your busy but have a update. By taking your advise about the cable I gave the sensor another look see. Well it wasn't the cable it was rust that was under the sensor that I didn't see knock it off with a screw driver and brushed it off. Your advise caused me to take another look and saved me a trip to the mechanic. So have to say thank you for pointing me back to take a look at the cable but did find the rust. Thanks again
There is no Toyota dealer that has reasonable prices, on anything.
