I replaced the bearing kit for the ac compressor because the bearing failed. The air was working while the bearing was failing and I left the compressor on the vehicle and the coolants intact. Now when the ac is turned on i notice a poer drain but

Last Post

20/09/2026 7:31 pm

Topic starter

The clutch plate doesn't engage. I tested the gap in the plate and it's correct I tested the coil by applying power directly to it and the plate engages with the pulley. I have power at the connection for the compressor I had a zero ohms reading when I tested the input and output wires on the compressor which is unbolted from the moter at this point but still not discharged of coolant.