Hi,
Have just replaced the master and slave cylinders as well as the damper on a 2006 Toyota Hi-ace Commuter, have pressure bleed the clutch and no air in clutch at all, the problem I have is the clutch pedal goes to the floor and does not return and there is no pressure at all to the slave cylinder. what am I doing wrong this is the first time have this kind of problem.
Thanks for your time with this question.
AGE6462
Well that thing is pretty old so you got to make sure you got good parts. The master cylinder sends fluid till the clutch slave cylinder. Either that master cylinder is not any good that you bought or more often there's air in the system. It's very hard to bleed air out of those things. For instance, I use a reverse Phoenix injector machine that pumps fluid from the slave cylinder back up into the master and it always gets rid of the air. If you try bleeding it at the slave cylinder that often doesn't work cuz air wants to go up not down. So a pressure bleeder connected to the slave cylinder pushes fluid up and the air goes up in the air where it normally would and bubbles out of the master then works
