2007 accord. I want to be as detailed as I can because I have a bad vibration and pull to the left. I replaced the steering rack with inner and outer tie rods. During that process I broke the clock spring which I haven't replaced yet. I also kind of eye balled the tie rods to center the shaft on the rack. It's not perfectly centered but really close. I know I have worn motor mounts on too. Everything seems right tho. I even balanced my tires today to make sure. Brand new tires. There is one bolt to the rack that bolts onto the subframe where the threads are messed up and doesn't thread on at all, the one on the front of the rack on the driver's side. It just slides in. I tightened everything else but I honestly don't want to re thread that where it goes to the subframe... Also the brakes. I replaced pads and rotors all around. My slide pins seized in the rear. I bought 2 new ones for the LR bracket but every other one I made work including the fronts and I greased them good. But they were old and a couple in the rear were pitted. Worth mentioning. It seems to be different the more I mess with it. It had worn out suspension and other things when I bought it but I seem to make it feel more structurally sound.. but with issues. I can't seem to figure it out.
Are you having network issues? If so, then please wait until you have a stable connection. If you are pressing the submit button more than once, please stop. Press it once, and wait for it to finish processing. (You posted this seven times in rapid succession.) Otherwise it creates more work for moderators to clean up, and eventually the system will automatically ban your from entering.
