03 f250sd 5.4 4r100 4x4 165k
Reason I ask is I can't find a line diagram or picture(s) that shows the stock auxiliary trans cooler set-up. Nothing in Chilton either.
Came out this morning & realize that I can't remember were to plumb the lines coming from the tranny, all videos or images I've found show aftermarket ones or both lines going right into the bottom of the radiator in spots that are already spoken for.
One is threaded(can't find an empty hole near where it dead ends), the other goes to something via hose(can't find any lose hose or a nipple)....I don't recall pulling any off the front end probably because they snapped off so that's a big problem.
I should have taken pictures myself but the phone stays indoors so I don't get distracted.
Well realize that many cars come with parts that are extra maybe you have an extra part they build them all the same and ones that have one system or another will often have parts for the system that they don't even contain cuz it's cheaper to make the cars that way. They're off and all kinds of extra wires that don't plug into anything but do look to see if there's anything threaded to screw it into because if there is it's going to be quite obvious with a open female and it would screw into
That's what I've been searching for, can't find a free threaded hole anywhere unfortunately, leaving this line hanging, I believe it's the oil to water, the other return from the air to oil section:
Thanks for making the image pop up instead of the link, how do you do that?
you want just the "https://i.ibb.co/fkHSCsZ/ 20220404-180201.jpg" part
👍
Gotcha, that's been driving me nuts. My brain keeps reverting to using html like a site from a decade ago but even that was failing.