Car Questions

How do I fix Solara...
 
Notifications
Clear all

How do I fix Solara misfire

  

0
Topic starter

Bank 1 mifire, Cylinder 1,3,5 - 2001 Toyota Solara V6 1MZ-fe

 

Codes from the ObD2 Scanner are

P0300 - random/Multiple Misfire
P0301 - Cylinder 1 misfire
P0303 - Cylinder 3 misfire
P0305 - Cylinder 5 misfire
All of this are in ( BANK 1)
P0171 - System Too Lean Bank 1
P1300 - igniter circuit Malfunction No.1

Spark plugs are new and new Ignition wires for the whole bank 1. I also Replace both knock sensors for both banks 1 and 2. 

Could it be a bad injector or a vacuum leak?

Or maybe a bad maf sensor and igniter coil?

I ran the car with the blinking check engine light and when i came home ,i notice the exhuast for bank 1 was super red. 

 


You asked this question 2 hours before posting this one. Do not ask the same question over and over.


1 Answer
0

maf sensor or coild (if there's one) would affect all the cylinders. It would be unusual for 3 injectors on one side to fail simultaneously.

 

It sounds like bad intake gasket. Try spraying starter fluid around bank one intake.

 

Scotty has a whole bunch of videos about misfires. Search his Youtube channel page for keyword misfire.

https://carkiller.com/scottykilmer/qa/read-this-first/


Share: