Car Questions

Honda Accord CL9 - ...
 
Notifications
Clear all

Honda Accord CL9 - clutch noise

  

0
Topic starter

Hello, I have a 2007 Honda Accord 2.4 L. When I press on the clutch and it goes close to the end, you can hear a loud "pop"/"quick squeak". Considering I have small troubles entering first or second gear at some times, is it possible that my master cylinder is going bad? Thanks in advance


4 Answers
1

Your throwout bearing is going out and needs to be replaced, along with the clutch disc, pressure plate and pilot bearing.


They were changed half an year ago, the noise was present before that, and now it still persists.


1
Posted by: @tachkata

They were changed half an year ago, the noise was present before that, and now it still persists.

Is the noise coming from your clutch master cylinder or from inside the clutch?


Hard to pinpoint exactly. Sounds like just in front of my feet


You may be able to pinpoint it with a gadget like the one Scotty has demonstrated in his videos.


https://www.youtube.com/watch?v=Wy5nqh3LSs4


1

The important question is, does it make this noise with the engine running, with the engine off or all the time.  Check your clutch linkage, beginning with the push rod at the clutch pedal and go from there.  Maybe some worn bushings so you're not completely disengaging the clutch when shifting in the lower gears.  In higher gears, you wouldn't notice so much.


The sound is present even with the car turned off


0

Check all the linkage.


Share: