Notifications
Clear all
0
02/11/2020 6:52 pm
Topic starter
Scotty,
Since we all hate FCA, can you do a video on this complete BS TSB put out about the 3.6L V-6? I have a Jeep that I love, but it burns a stupid amount of oil...FCA says this is completely normal.
TSB Number: 09-007-15
The accepted rate of oil consumption for engines used in the vehicles listed above is 1 quart (0.946 liter) in 2,000 miles (3,200 km) for the 1st 50,000 miles (80,467 km). For vehicles with more then 50,000 miles (80,467 km) the acceptable oil consumption for engines is 1 quart (0.946 liter) in 750 miles (1,207 km).
On a side note, I'm also trying to diagnose a no code misfire. It doesn't run bad or rough even, but you can hear a puff/pop out of the exhaust every few seconds at idle.
2013 Jeep JKUR 3.6L Automatic with ~108,000 miles
1 Answer
0
15/11/2020 8:28 pm
Yeah Chrysler and Jeep a marriage of two crappy companies. It is normal for them because they're poorly made.ask for misfire if you know good mechanic have a road test it then analyze the live and mode six data to see what's acting up
