2016 QX80 113k miles
My wife was driving on the interstate and felt a hard shaking. I later test drove and notice what I describe as hitting a rev limiter at 3500rpms. The vehicle’s check engine light is on and the the following codes:
P0011, P0021, P0014, P0024
All VVT Solenoids are operating properly, oil level is fine. The vehicle runs and idles normally as long as you stay under 3500 rpm.
The codes most likely share a common cause, such as a stretched timing chain or electrical problems. See troubleshooting information in the links below.
https://www.carparts.com/blog/p0011-code-a-camshaft-timing-over-advanced-bank-1/
https://www.carparts.com/blog/p0021-code-a-camshaft-position-timing-over-advanced-bank-2/
https://www.carparts.com/blog/p0024-code-exhaust-b-camshaft-position-timing-over-advanced-bank-2/
Did you ever figure out what the issue was ?
@yovany2x The person you are asking has not been active here in 5 months and is unlikely to see your question. If you are experiencing a car problem please post your own topic with all vehicle details per the posting instructions, as well as a clear, concise description of the problem as well as any diagnostic procedures already performed.