Just to be clear, you are looking for a wiring diagram so you can clear the light on your dash because you don't want to replace a tpms sensor and hate seeing the light there. Also assuming that you don't want to use just a piece of black tape.

I would first like to heavily advise against messing with the module less you just happen to be an electrical expert. This isn't a 2007 4runner that you can just splice 2 wires and be good to go. You could very well get some unwanted dtc's or worse if it is attempted.

That being said, Best way I have found so far is just to get someone to help you code out the modules. Or go on ebay and get like a $40 tpms module of your car to crack open to find a way to bypass it first... But again it's a risk compared to a piece of black tape.

That light has been shining on my 4 years old Auris for quite some time. And I don't care.

Thank you for your answer. 

Unfortunately I can't use a black tape. I live in the UK and if the TPMS sensors don't work, they will fail my car for the annual technical inspection.

I don't want to spend money on this system. I can check myself the tyre pressure. 

That's why I want to get rid off the light. 

I was thinking that maybe someone has access to alldata website and could help me out with a wire diagram. 

Posted by: @victorzamfir

if the TPMS sensors don't work, they will fail my car

then I guess you have to replace the sensors